Fault analysis and treatment of automatic liquid packaging machine
Now the automatic liquid packaging machine is becoming more and more popular, but the masses have not fully mastered the technical knowledge of the machine and equipment, and they still need to learn and master it comprehensively. It is unclear what common faults of the machine and equipment are. Here is a detailed introduction to the next step.
The sealing performance of automatic liquid bag machine is poor. How to deal with water seepage? It may be caused by improper adjustment of the die and insufficient pressure. Or the sealing time is too short, resulting in too loose sealing. Just extend the sealing time a little.
What is the common fault that the automatic liquid packaging machine does not move during liquid level operation? This problem is generally caused by insufficient standard pressure, or the air storage tank of the air compressor is too small, resulting in insufficient air path. Check whether this is the reason.
The problem that the automatic filling machine cannot fill cans. Based on the in-depth analysis of practical problems, different metrological verification methods have different provisions on the items of supporting facilities. Generally speaking, the reliability of feed working pressure, the symmetry of relative density of materials, the effectiveness, effectiveness and operability of metrological verification method will do harm to the final canning results. There will also be deviations: 1% of the plunger pump, 0.2% of the scale weight, etc. In addition, raw materials are also harmful. The different liquidity and relative density of raw materials will cause the set statistical data to fail to meet the requirements and need to be reset. Moreover, the loading speed is faster and faster, and the accuracy is lower and lower, which causes the goods logistics to lag behind the loading and cause deviation.